Acoustic-research AW822 Bedienungsanleitung PDF herunterladen (Seite 8)

1. Press the ON/OFF/TUNING/VOL. control

on the side of the speaker to turn it on. The

STDBY./TUNED light on the front of the speaker

illuminates red while the speaker is tuning to the

transmitter. The STDBY./TUNED light turns blue

when the speaker is tuned to the transmitter—you

should hear sound coming from the speaker now.

Note: If the speaker is not tuned or if the transmitter is

not connected properly, the STDBY./TUNED indicator

will not turn from red to blue. If this occurs, please see

the troubleshooting section of this manual.

Tuning the Speaker

Adjusting the Transmitter

2. Set the channel select switch on the back of the

transmitter to one of the transmitter’s three

broadcast frequencies: 1, 2 or 3. If you experience

poor reception or interference, try choosing a

different frequency by moving the channel select

switch to another position.

Transmission Indicator Light

Transmitter Front View

Transmitter power

input jack

Built-in audio

input cable

Channel

select switch

Transmitter Back View

When the transmitter is receiving an audio signal

and is ready, the light on its front turns blue.

Note

If the light on the front of the transmitter does not turn

on, please check the following:

- Conrm the transmitter AC power adapter is

securely connected.

- Conrm the cable from the transmitter is securely

connected to the audio source output (TV, A/V

receiver, etc.).

1. Turn on your audio source (for example, A/V receiver, TV, stereo, etc.) and play

music at a normal listening volume.

Speaker Side View

Power/Tuning/

Volume Control

1 2 3 4 5 6 7 8 9 10 11 12 13

Kommentare zu diesen Handbüchern

Keine Kommentare

Acoustic-research AW822 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Akustik Acoustic-research AW822